Casio XJ-F Series Скачать руководство пользователя | Manualshive

Страница: 87 / 89

background image

87

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not
applicable to other areas).

NOTICE

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,
pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection
against  harmful  interference  in  a  residential  installation.  This  equipment  generates  uses  and  can
radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may
cause  harmful  interference  to  radio  communication.  However,  there  is  no  guarantee  that  interference
will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause  harmful  interference  to  radio
or  television  reception,  which  can  be  determined  by  turning  the  equipment  off  and  on,  the  user  is
encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the  following  measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION

Changes  or  modifications  not  expressly  approved  by  the  party  responsible  for  compliance  could  void
the  user’s  authority  to  operate  the  equipment.
Proper  connectors  must  be  used  for  connection  to  host  computer  and/or  peripherals  in  order  to  meet
FCC  emission  limits.

Connector cable....XJ-UT312WN/XJ-UT352W/XJ-UT352WN/XJ-F11X/XJ-F21XN/XJ-F101W/XJ-F211WN

unit to PC

Declaration of Conformity

Model  Number: XJ-UT312WN/XJ-UT352W/XJ-UT352WN/XJ-F11X/XJ-F21XN/XJ-F101W/XJ-F211WN
Trade  Name:  CASIO  COMPUTER  CO.,  LTD.
Responsible  party:  CASIO  AMERICA,  INC.
Address:  570  MT.  PLEASANT  AVENUE,  DOVER,  NEW  JERSEY  07801
Telephone  number:  973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1)  This  device  may  not  cause  harmful  interference,  and  (2)  this  device  must  accept  any  interference
received,  including  interference  that  may  cause  undesired  operation.

XJ-UT312WN/XJ-UT352W/
XJ-UT352WN/XJ-F11X/XJ-F21XN/
XJ-F101W/XJ-F211WN

FOR CALIFORNIA USA ONLY

Perchlorate Material – special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

«
...
85
86
87
88
89
»

Содержание XJ-F Series


























































































Отзывы:

Нет отзывов

Похожие инструкции для XJ-F Series

Бренд: GDC Страницы: 64

Бренд: Patton electronics Страницы: 3

Бренд: Neher Страницы: 12

Бренд: Optoma Страницы: 2

Cinema Mirror HC 37.53

Бренд: AVR Страницы: 9

Бренд: BenQ Страницы: 84

Harry the hedgehog

Бренд: ZAZU Страницы: 23

Бренд: AccuDual Страницы: 6

Бренд: Ricoh Страницы: 24

Бренд: Panamax Страницы: 2

Бренд: Barco Страницы: 86

Бренд: BenQ Страницы: 75

Бренд: Navitar Страницы: 20

DigitalMedia 3 Series

Бренд: Crestron Страницы: 18

Бренд: InFocus Страницы: 4

Бренд: LAS Страницы: 8

Бренд: Epson Страницы: 180

Бренд: Philips Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды