EN-11
English
Power Requirements
TRACKFORMER supports operation using one of
three different power supplies: household electrical
power, batteries, or USB bus power from a computer.
Be sure to turn off power whenever you are not using
TRACKFORMER.
Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with TRACKFORMER. Use
of a different type of AC adaptor can cause
malfunction.
Specified AC Adaptor: AD-A12150L
•
Use the supplied power cord to connect the AC
adaptor as shown in the illustration below.
Note the following important precautions to avoid
damage to the power cord.
■
During Use
•
Never pull on the cord with
excessive force.
•
Never repeatedly pull on the
cord.
•
Never allow the cord to twist
at the base of the plug or
connector.
■
When moving TRACKFORMER
•
Before moving TRACKFORMER to another location
or repositioning it, be sure to unplug the AC adaptor
from the power outlet.
■
During storage
•
Loop and bundle the
power cord, but never
wind it around the AC
adaptor as shown in the
illustration.
IMPORTANT!
• Use only the AC adaptor (JEITA Standard, with
unified polarity plug) that comes with
TRACKFORMER. Use of a different type of AC
adaptor can cause malfunction.
• Make sure TRACKFORMER is turned off before
plugging in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
• Never use the supplied power cord with any other
device.
■
About the AC adaptor that comes with
TRACKFORMER
•
Plug the AC adaptor into a power outlet that is
located close to TRACKFORMER. Should you ever
notice any abnormality, immediately unplug the AC
adaptor from the power outlet.
•
The AC adaptor is designed for indoor use only. Do
not place the AC adaptor in a location where it may
become wet. Do not place a vase or any other
container of water on the AC adaptor.
•
Store the AC adaptor in a dry location.
•
Use the AC adaptor in an open, well-ventilated area.
•
Do not allow the AC adaptor to become covered by
newspaper, a table cloth, a curtain, or other material.
•
If you do not plan to use TRACKFORMER for a long
time, be sure to unplug the AC adaptor from the
power outlet.
•
The AC adaptor cannot be repaired or serviced.
•
Output Form:
Use six AA-size batteries for power.
You can use any one of the following types of batteries
for power: AA-size manganese batteries, AA-size
alkaline batteries, rechargeable AA-size Panasonic
Group eneloop or EVOLTA batteries. Do not use any
other type of rechargeable batteries except for those
specified above. In the case of rechargeable batteries,
use only the specified special charger required for
either battery type. When using a battery charger, be
sure to read and follow the instructions and
precautions in the user documentation that comes with
the charger. TRACKFORMER does not come with
chargeable batteries or a charger.
Using an AC Adaptor
Household power outlet
Power cord
Power terminal (DC 12V)
AC adaptor
Using Batteries
XWDJ1-ES-1A.indd 13
2014/11/28 17:15:48
