Casio SE-S3000 Скачать руководство пользователя

Страница: 5 / 112

E-5

To use the cash register safely

Warning

Power plug and AC outlet

•

Use only a proper AC electric outlet. Use of an outlet with a different voltage from the

rating creates the danger of malfunction, fire, and electric shock. Overloading an electric

outlet creates the danger of overheating and fire.

•

Make sure the power plug is inserted as far as it will go. Loose plugs create the danger of

electric shock, overheating, and fire.

•

Do not use the register if the plug is damaged. Never connect to a power outlet that is

loose.

•

Use a dry cloth to periodically wipe off any dust built up on the prongs of the plug. Humid-

ity can cause poor insulation and create the danger of electric shock and fire if dust stays

on the prongs.

•

Do not allow the power cord or plug to become damaged, and never try to modify them in

any way. Continued use of a damaged power cord can cause deterioration of the insula-

tion, exposure of internal wiring, and short circuit, which creates the danger of electric

shock and fire.

•

Contact CASIO service representative whenever the power cord or plug requires repair or

maintenance.

Caution

•

Do not place the register on an unstable or uneven surface. Doing so can cause the

fire, and electric shock.

Do not place the register in the following areas.

•

Areas where the register will be subject to large amounts of humidity or dust, or directly

exposed to hot or cold air.

• Areas exposed to direct sunlight, in a close motor vehicle, or any other area subject to

very high temperatures.

The above conditions can cause malfunction, which creates the danger of fire.

•

Do not overlay bend the power cord, do not allow it to be caught between desks or other

furniture, and never place heavy objects on top of the power cord. Doing so can cause

short circuit or breaking of the power cord, creating the danger of fire and electric shock.

•

Be sure to grasp the plug when unplugging the power cord from the wall outlet. Pulling on

the cord can damage it, break the wiring, or cause short, creating the danger of fire and

electric shock.

•

Never touch the plug while your hands are wet. Doing so creates the danger of electric

shock. Pulling on the cord can damage it, break the wiring, or cause short, creating the

danger of fire and electric shock.

•

At least once a year, unplug the power plug and use a dry cloth or vacuum cleaner to clear

dust from the area around the prongs of the power plug.

Never use detergent to clean the power cord, especially power plug.

•

Keep small parts out of the reach of small children to make sure it is not swallowed ac-

cidentally.

Содержание SE-S3000

















































































































Результаты поиска

Содержание SE-S3000

Отзывы:

Похожие инструкции для SE-S3000

Бренды по названию

Популярные бренды

Casio SE-S3000, Руководство пользователя

Результаты поиска

Содержание SE-S3000

Отзывы:

Похожие инструкции для SE-S3000

Бренды по названию

Популярные бренды