Casio QV-8000SX, Руководство по обслуживанию и список запасных частей

Страница: 7 / 57

— 5 —
1. Program version upgrading
The program and the graphic menu are stored in the camera unit.
Confirm the version number of them, and if old version data are used, change them to the latest version.
For making an upgrade, two methods are available: with a CF card or with a PC link cable.
Notes:
(1) Make sure to use an AC adaptor.
In case the power is cut off during the program transmission or an error is occurred, the D-PCB will be
defective and unusable.
(2) Note that products with a mask ROM cannot be upgraded.
1-1 How to confirm the program (graphic menu) version
(1) Activate the TEST mode.
Turn on the power while pressing DISP and MENU keys.
(2) Confirm indications on the LCD monitor.
(Example of indications)
TEST MODE
PROG 99. 09. 10. 13. 28
←
Program version
GMENU 99. 08. 23. 13. 05
←
Graphic menu version
. . . .
1-2 Upgrading procedure using the CompactFlash card
1. In case the internal program version of the camera unit is 99.08.25 or older.
(1) Copy a program of the latest version (_ROM.BIN) and a graphic menu (_GMENU.BIN) to the
CompactFlash card.
Install the CompactFlash card into the camera.
(2) Connect an AC adaptor to the camera.
(3) Activate the TEST mode.
Turn on the power while pressing DISP and MENU keys simultaneously.
(4) The LCD monitor of the camera will indicate a sort of green-colored noise.
In the center of the monitor, the following indications will appear.
In approximately one minute, two “OK” indications will appear, meaning that the upgrading has been
completed correctly.
SIZE OK 6 0 3 6 6 4
SIZE OK 1 3 7 0 9 6 0
(5) Plug out the AC adaptor plug from the camera. (Note that the power cannot be turned off using the
power switch.)
(6) Exchange the card with a CompactFlash card for photography.
(7) Activate the TEST mode and confirm the version.
Turn on the power while pressing DISP and MENU keys simultaneously.
(8) Finally, confirm operations (recording and play back).