Casio QV-8000SX, Руководство по обслуживанию и список запасных частей

Страница: 13 / 57

— 11 —
3-2 Flash adjustment (when Lens unit is replaced)
1. Outline
Flash adjustment data are recorded in the Lens unit.
When you exchange a Lens unit, Please be sure to carry out.
2. Caution
If the program version is as follows, perform the adjustment after you upgrade the program.
(Otherwise data transmission is disabled.)
For upgrading or confirming the program version, refer to the sections in [1] Program version upgrading.
PROG 99. 08. 06. 17. 01
GMENU 99. 08. 16. 13. 38
3. Procedures
(1) Connect an AC adaptor and a PC link cable to the camera.
Caution: Make sure to insert the L-shaped plug of the PC link cable facing the VIDEO OUT side.
Otherwise it is impossible to insert it completely.
To the PC side, connect the cable to the serial port COM 1.
(2) Set the camera in the PLAY mode and turn on the power.
(3) Activate the ADJ program (ADJ713.EXE).
At this point, adjustment data of each item is set as 0 (zero).