Casio Privia PX-S3100, Руководство пользователя, Страница: 47 / 96

Digital Piano Operations
EN-46
■
To select a track number before recording
1.
Use the 3 mode selector button to cycle
through settings until the “SONG” (SONG
Mode) indicator is lit.
2.
Use the bk
–
and bl
+
buttons to select a song
number.
• Song numbers 11 through 15 are MIDI recorder areas.
If necessary, you can touch
8
a
to check whether
or not the selected area already has something
recorded to it.
• To record to the song number you select here, perform
the procedure under “ To record to the system track ”
(page EN-45 ). If the system track of the selected song
number already has recorded data, it will be
overwritten by the new recording.
■
To overdub record a solo track over a recorded
system track
• If you are performing the procedure below immediately
following the procedure under “ To record to the system
track ” (page EN-45 ), you do not need to enter the SONG
Mode or select a song. Therefore, you should skip steps 1
and 2 below.
1.
Use the 3 mode selector button to cycle
through settings until the “SONG” (SONG
Mode) indicator is lit.
2.
Use the bk – and bl + buttons to select the
song number of a MIDI recorder song that was
recorded to the system track.
• Song numbers 11 through 15 are for songs recorded
with the MIDI recorder. If necessary, you can touch
8
a
to play back the song and check its contents.
3.
Configure tone and other settings you want to
use for recording.
• For setting items that can be recorded at the beginning
of a recording, see the “Solo” column in the table
under “
Recorded Data for Each Track ” (page EN-44 ).
4.
Touch
bo
REC
0
.
This enters record standby, indicated by bo
REC
0
flashing red.
5.
Hold down the bo REC
0
button until “[MIDI
REC SETTING]” appears on the display.
6.
After confirming that “Rec Track” is displayed,
touch
bm
ENTER
.
7.
Use the bk
–
and bl
+
buttons to select a
track.
• The display will show “Solo 1” or “Solo 2” depending
on the solo track you select.
8.
To start recording, play something on the
keyboard or touch
8
START/STOP
. *
This simultaneously starts playback of the system track
and recording to the solo track you selected in step 7
above.
This causes
bo REC
0
to stop flashing and remain lit
red, which indicates that recording is in progress.
* Recording can also be started using other operations.
For details, see “
Operations that Start Recording ”
(page EN-45 ).
9.
To stop recording, touch bo
REC
0
.
10.
To play back the song you just recorded, touch
8
a
.
• This will play back the contents of both the system
track and the solo track.
• If you want to overdub record the other solo track,
perform steps 3 through 10 again, selecting the
remaining (unrecorded) solo track in step 7.
[ M I D I R E C S E T T I N G ]
–
S y s t e m
+
R e c T r a c k