background image

Overview and Setup

EN-8

Use the 

cs

PEDAL UNIT

 jack to connect a separately 

available Pedal Unit (SP-34). You can then use the pedals for 
expression that is similar to that available on an acoustic 
piano.

SP-34 Pedal Functions

Damper Pedal

Pressing the damper pedal while playing will cause the notes 
you play to reverberate. The SP-34 pedal also supports half-
pedal operation, so pressing the pedal part way applies only a 
partial damper effect.

Soft Pedal

Pressing this pedal suppresses notes played on the keyboard 
after the pedal was pressed, and makes them sound softer.

Sostenuto Pedal

Only the notes of the keys that are depressed when this pedal 
is pressed are sustained, even if the keyboard keys are 
released, until the pedal is released.

Use the 

dl

EXPRESSION/ASSIGNABLE

 jack to connect a 

commercially available expression pedal or a CASIO sustain 
pedal (included SP-3 or separately available pedal).
Perform one of the operations below depending on the pedal 
that is being connected.

Connectable Expression Pedals

• Maximum resistance value: 10k

±20% to 50k

±20%

• Use of a pedal whose operation has been confirmed (see 

below) is recommended.

Operation Confirmed Pedals (Polarity Type 2)

Roland EV-5 (Set minimum volume to 0.)
KURZWEIL CC-1
FATAR VP-25, VP-26

PEDAL UNIT jack

Soft Pedal

Sostenuto Pedal

Damper Pedal

EXPRESSION/ASSIGNABLE Jack

For this type 
of pedal:

Perform this operation:

Switch type 
pedal

(1) Use the procedure under “

To specify the 

pedal type

” (page 

EN-9

) to select “SW”.

(2) Use the procedure under “

To specify the 

pedal function

” (page 

EN-9

) to select a 

switch type pedal setting.

Expression 
pedal

(1) Use the procedure under “

To specify the 

pedal type

” (page 

EN-9

) to select a 

polarity type that matches the pedal 
being connected.

(2) Use the procedure under “

To specify the 

pedal function

” (page 

EN-9

) to select an 

expression pedal setting.

(3) Perform the procedure under 

Expression Pedal Calibration

” (page 

EN-9

).

Содержание Privia PX-S3100

































































































Отзывы: