background image

EN-70

Troubleshooting

Error Messages

Display

Cause

Action

Limit

• You are attempting to record more than 999 

measures with the MIDI recorder.

• You are attempting to record more than 

approximately 25 minutes with the audio recorder.

• Keep MIDI recorder recordings up to 999 measures 

long.

• Keep audio recorder recordings within 

approximately 25 minutes.

Memory Full

You are attempting a recording that exceeds the 
allowable per-song limit.

Keep song recordings with the allowable per-song 
limit.

Data Full

You are attempting to record more than 5 multi-track 
songs.

Delete some of the songs in memory.

No Media

The USB flash drive is not plugged correctly into the 

cq

USB

 Type A port.

Correctly plug the USB flash drive into the 

cq

USB

 

Type A port.

The USB flash drive was removed while some 
operation was in progress.

Do not remove the USB flash drive while any operation 
is in progress.

The USB flash drive is write-protected.

Write-enable the USB flash drive.

The USB flash drive is protected by anti-virus 
software.

Use a USB flash drive that is not protected by anti- 
virus software.

No File

There is no loadable or playable file in the MUSICDAT 
folder.

Move the file you want to load into the MUSICDAT 
folder or the file you want to play into the MUSICDAT 
folder (page 

EN-65

).

Read Only

A read-only file with the same name you are trying to 
use is already stored on USB flash drive.

• Change the name and then save the new data.
• Remove the read-only attribute from the existing 

USB flash drive file and overwrite it with the new 
data.

• Use a different USB flash drive.

Media Full

There is not enough space available on the USB flash 
drive.

Delete some of the files on the USB flash drive to 
make room for new data or use a different USB flash 
drive.

Too Many Files You are attempting to start a record operation with the 

audio recorder when there are already 99 audio 
recorder songs in the MUSICDAT folder. This error 
occurs whenever there is a file named TAKE99.WAV 
(page 

EN-50

in the MUSICDAT folder on the USB 

flash drive.

Use a computer to move files named TAKE01.WAV 
through TAKE99.WAV from the MUSICDAT folder to 
another folder or drive.

Not SMF 0/1

You are attempting to play back SMF Format 2 song 
data.

Playback of SMF Format 0 or Format 1 only is 
supported.

Large Size

The SMF file on the USB flash drive cannot be played 
because it is too big.

Playback of SMF files up to approximately 320 KB in 
size is supported.

Wrong Data

The USB flash drive data is corrupted.

Version

The USB flash drive file version is not supported by the 
Digital Piano.

Use a file whose version is supported by the Digital 
Piano.

Format

The USB flash drive format is not compatible with this 
Digital Piano.

• Use a computer or other device to change the USB 

flash drive format to something that is compatible 
with the Digital Piano (pag

EN-62

).

• Use a different USB flash drive.

USB flash drive memory is corrupted.

Use a different USB flash drive.

No Wireless 
Adptr

The Wireless MIDI & audio adaptor is not plugged into 
the 

cq

USB

 Type A port.

Plug the Wireless MIDI & audio adaptor into the 

cq

USB

 Type A port.

Содержание Privia PX-S3100

































































































Отзывы: