8
Part II
Channel Message
4
Receive Channel
The channel number of the channel message received by each part is shown in the table under "1.4.2 Part Block".
The channel number of a channel message that changes the settings of a DSP coincides with the channel of the part that
is using the DSP.
5
Send Channel
Basically, the MIDI channel of the channel message sent when the Instrument is played coincides with the MIDI channel
of the part being played. Note, however, that the MIDI channel of the performance information that corresponds to the
keyboard main part is the Keyboard Channel setting value.
6
Note Off
Format
Send
Sent when something is played on the keyboard.
Receive
Received over MIDI channels that correspond to each part. A part that is turned off by the Part Enable Parameter value
explained under "21.6 Part Parameter" is not received. The velocity value is ignored.
7
Note On
Format
Send
Sent when something is played on the keyboard.
Receive
Received over MIDI channels that correspond to each part. A part that is turned off by the Part Enable Parameter value
explained under "21.6 Part Parameter" is not received.
Message Format:
9nH kkH 00H (receive only)
8nH kkH **H
n:
MIDI Channel Number
kk:
**:
Key Number
Ignored
Message Format:
9nH kkH vvH
n:
MIDI Channel Number
kk:
Key Number
vv:
Velocity
