E-10
To input accented characters
1. Press
.
2. Press the key that corresponds to the accented character you want to
input.
x
This will display a menu of accented characters.
3. Use and to select the accented character you want and then press
.
Special Symbols
You can also access a menu of special symbols by pressing
.
To input special symbols
1. Press the
key.
x
This will display a menu of symbols.
2. Use , , and cursor keys to select the symbol you want and then
press
.
Part 3 Deleting and Inserting Characters
To move the cursor
x
Press to move the cursor to the left, and to move the cursor to the right.
x
Press to move the cursor to the up, and to move the cursor to the
down.
x
Press
and then to make the cursor jump to the beginning (far left) of
the characters on the display.
x
Press
and then to make the cursor jump to the end (far right) of the
characters on the display.
x
Holding down the , ,
or cursor key moves the cursor at high speed.
To delete characters
1. Use and to move the cursor to the right of the character you want to
delete.
2. Press
to delete the character to the left of the cursor position.
To insert characters
1. Use and to move the cursor to the location where you want to insert
the characters.
2. Input the new characters.
x
This inserts the characters at the current cursor position.