Casio KL-7400, Руководство пользователя

Страница: 57 / 68

E
54
Message See page: Cause and Action Message See page: Cause and Action
NO DATA!
NO INPUT TEXT!
NOT ENOUGH
DIGITS!
PENDING DATA WILL
BE LOST
CONTINUE? SET/ESC
•
You are trying to recall or
delete memory data when
there is no data in memory.
➜
Store data in memory before
performing the current
operation.
•
You are attempting to
perform a paste operation
when there is no text copied.
➜
Copy text first.
•
You are attempting a print or
preview operation when
there is no text input.
➜
Input text before printing or
previewing.
•
You are attempting to
perform a copy operation
when there is nothing input.
➜
Input text first.
•
You are trying to print a bar
code that does not have the
required number of digits.
➜
Re-input the correct number
of digits.
•
To delete the text, press SET .
•
If you do not want to delete
the text, press
ESC .
45
40
18, 23
40
35
—
PRINT ERROR!
CHECK THE TAPE
CARTRIDGE!
•
The tape became jammed
during printing.
➜
Turn off the printer and
remove the tape cartridge.
Next, remove the jammed
tape.
•
There is something stuck in
the auto tape cutter.
➜
Turn off the printer and
remove the tape cartridge.
Next, remove whatever is
stuck in the auto tape cutter.
•
There is dirt, tape pieces, or
other foreign matter stuck to
the rubber roller.
➜
After removing the foreign
matter from the rubber roller,
clean the rubber roller.
•
The printer is being used in
an area that is exposed to
direct sunlight or some other
source of bright light, causing
malfunction of its optical
sensor.
➜
Turn off the printer and then
move it to a location that is
not exposed to bright light.
13
49
—