Casio IT-G500-15E Скачать руководство пользователя страница 17

Страница: 17 / 60

E-6

Charging the Battery Pack

Battery pack installed in the terminal can be charged using either cradle or battery

charger. Battery charge condition can be monitored with Indicator 1 on the terminal.

Multiple battery packs can also be charged simultaneously using Dual Battery Charger.

USB Cradle/Ethernet Cradle/Cradle-type Battery Charger

AC adaptor AD-S42120C for
Ethernet Cradle
AC adaptor AD-S15050B
for USB Cradle/Cradle-type
Battery Charger

Ethernet Cradle, USB Cradle only

Status of Indicator on IT-G500:

Orange: Charging

Red:

Standby due to battery pack error or the surrounding temperature is out of the

charging temperature range

(charging begins when the temperature is within the charging temperature range)

Green: Charging complete

Important!

Take care not to trap objects such as the neck strap in the cradle.

The data communication terminal should be cleaned from time to time using an

implement such as a dry cotton bud.

Soiling or dust buildup could cause connection problems.

Dual Battery Charger

Taking care that the battery pack is oriented correctly, insert it into the Dual Battery Charger.

This causes the Charge Indicator LED to light in red, indicating that charging has started.

AD-S42120C

You can connect up to three Dual Battery Chargers.

Status of Charge Indicator LED

Off:

Not charging

Red:

Charging

Red Flashing: Battery pack problem

Green:

Charging complete

Green Flashing: Standby due to the surrounding temperature being beyond the

specified temperature range (Approximately 0°- 40°C) (charging

resumes when the temperature reaches the range.)

•

Содержание IT-G500-15E





























































Результаты поиска

Содержание IT-G500-15E

Отзывы:

Похожие инструкции для IT-G500-15E

Бренды по названию

Популярные бренды

Casio IT-G500-15E, Руководство пользователя

Результаты поиска

Содержание IT-G500-15E

Отзывы:

Похожие инструкции для IT-G500-15E

Бренды по названию

Популярные бренды