E-7
Handling the Hand Belt
The hand belt is attached to the Handheld Terminal. Remove the hand belt when it is
not needed.
To remove the hand belt
1.
As shown in the illustration, hold down
the raised section on the Handheld
Terminal as you pull off the hand belt
buckle.
2. Peel off the hook and loop fastener and
pull the hand belt back through the slot
at the bottom of the battery pack cover.
To attach the hand belt
1. Feed the end of the hand belt through
the slot at the bottom of the battery pack
cover, fold it back and secure it at a
suitable length using the hook and loop
fastener.
2.
As shown in the illustration, align the
hand belt buckle with the attachment
position on the Handheld Terminal and
press the buckle into place.
Check that the buckle is fitted securely.
Tip!
Holding the Handheld Terminal as
shown in the figure will make it easier to
use.
