QW-3410
– 8 –
5-3. SETTINGS AFTER AC
Function
Settings
After AC Mode
Timekeeping Mode (after pushing any button except
E
.)
Timekeeping Mode
Date and time: Friday, January 1, 2010 12:00:00 AM
Display Switching: date, day of the week, hour, minute, second
Home Time DST: AUTO
Power-saving: ON
Button Operation Tone: BEEP (ON)
Auto Light: OFF
Backlight afterglow: 1.5 sec (LIGHT1)
Battery Level: HIGH
Note: The voltage is checked with the timing of a minute carry,
and then the actual battery level is displayed.
Home City Code: TYO (UTC+9)
Latitude/Longitude: Latitude 35.7 degrees north,
longitude 139.7 degrees east
Temperature Unit: °C
Altitude Unit: m
Barometric Pressure Unit: hPa
Barometric Pressure Graph: OFF
Barometric Pressure Information: OFF
World Time
WT City Code: UTC
Time: 3:00:00 PM
DST: All Cities OFF
Stopwatch
Setting: “Reset” (0H 00’ 00 00)
Countdown Timer
Setting: “Reset” (0H 10’ 00)
Start Time: 0H 10’ 00
Alarm
Display: Alarm 1
Time: 12:00 AM (AL1-4, SNZ)
Alarm: OFF (AL1-4)
Snooze: OFF
Hourly Time Signal: OFF
Sunrise/Sunset
Calculation starts when the mode is switched from the Time-
keeping Mode.
Date: Home City
Sunrise/Sunset Time: cleared (Calculating)
Altitude recall
Setting: Blank pages
Manual Memory data: cleared
Auto Memory data: cleared
Signal Reception
Last Reception Display: “— : — — / — — — —”
Auto reception: ON (Home City Code/TYO)
Display: RECEIVED (Sweeping Display)
Altimeter
Altitude data: cleared
Altitude tendency graph: cleared
Altitude difference graph: cleared
Altitude unit: meters (m)
Altitude Offset: OFF
Baseline altitude of altitude difference indicator: 0 m
Display: Altitude tendency graph