– 13 –
13 –
–
QW-5117
CHECKING ALL ILLUMINATION AND PARTIAL ILLUMINATION
7-55
While on the Timekeeping mode, hold down
1)
D
and press
A
and
C
at the same time.
Press
2)
D
three times.
Check that all indication on the LCD illuminates.
Press
3
)
D
to check that the partial indication on the LCD
illuminates.
Exiting the All Illumination and the Partial Illumination mode
4
)
You may return to the Timekeeping mode from either mode by
pressing any button except for
D
.
SOLAR CELL-PCB ASS’Y CONTACT CHECKING
7-65
While on the Timekeeping mode, hold down
1)
D
and press
A
and
C
at the same time.
Press
2)
D
five times.
The display on the LCD 1 changes to SLR, indicating that light is sufficient.
Place the watch on a desk with its glass face down for 2 seconds or more. Or go to a dark area
3
)
and leave the watch for 2 seconds or more.
8888 appears on the LCD 2 indicating that light is insufficient.
End the Solar Cell-PCB Ass’y Contact Checking mode
4
)
Press any button or wait for the Auto Return (AR) to return to the Timekeeping mode.
AGING MODE
7-75
This mode allows you to check for lagging/advancing or stoppage of the hand(s) due to aging.
Aging mode differs from Timekeeping mode in following functions:
• Button operations, such as changing mode, are disabled. (Doing so will end the Aging mode.)
• The watch continues its timekeeping operations.
• Time signal is not received.
• The Sleep mode does not activate automatically.
PROCEDURES
While on the Timekeeping mode, hold down
1)
D
and press
A
and
C
at the same time.
The watch enters in the Watch Accuracy checking mode and the LCD partially illuminates.
Hold down
2)
D
and press
B
.
AGE appears on the LCD 1 and the watch enters into the Aging mode.
Exit the Aging mode.
3
)
Press any button to return to the Timekeeping mode.
LCD 1
LCD 2
Location of the buttons and name of
the lcds
