11
Introduction (Basic Operation)
Introduction (Basic Operation)
The battery is not fully charged at the time of purchase. Use the procedure below to
load the battery into the camera and charge it.
• This camera uses a CASIO dedicated lithium-ion rechargeable battery (DNP-
100M) as its power supply. (Batteries other than the DNP-100M cannot be used.)
1.
Open the battery cover.
2.
Insert the battery.
Hold the battery so that the CASIO
logo faces down (towards the lens)
and insert the battery so that the
side of the battery shifts the
stopper in the direction of the
arrow. Push the battery in firmly
until the stopper engages with the
battery.
3.
Close the battery cover.
After unpacking the product, charge the battery
Inserting the battery
CASIO logo
Stopper
Battery
Back
Front