51
7.2.2 General
•
Avoid exposing it to water and foreign matter. Should foreign matter (metal chips, water, liquid
chemicals) enter inside the DT-X11, immediately turn off it, remove the batteries, unplug the
AC adaptor, then contact a CASIO distributor.
•
Be aware of abnormal conditions. If the DT-X11 is continuously used in an abnormal condition,
a fire or electric shock may occur. If there is an abnormality on the terminal, immediately turn
off the Power switch, and be sure to remove the batteries and unplug the AC adaptor from the
wall outlet, then contact a CASIO distributor for repair.
•
Do not use the AC adaptor with a line voltage other than that indicated on its rating plate. Also,
avoid drawing power from an outlet used by multiple devices. This may cause fire or an
electric shock.
•
AC adaptor
-
Always use the dedicated AC adaptors only. If an AC adaptor that is not specified is used,
the battery pack may explode, causing a fire or personal injury.
-
Do not touch the AC adaptor with wet hands. This may result in an electric shock. Also,
place the AC adaptor in a place where it is not subject to dust, moisture and water. Dust and
dirt may cause fire and smoke, and moisture and water may cause an electric shock.
-
When this terminal is not used for an extended period of time, e.g. during absences, unplug
the AC adaptor from the wall outlet.
•
Power cable of AC adaptor
-
Do not damage, break, retrofit, bend, twist, or stretch the power cable. Also, do not place a
heavy object on it or heat it. If this is done, the power cable may be broken and cause a
fire or electric shock.
-
Do not bring the power cable close to heating equipment such as stove. The cable coating
may burn or melt, resulting in fire or electric shock.
-
Do not bring the power cable close to a container filled with liquid. If the cable becomes
wet or should the container be tipped over, a fire or electric shock may result.
-
Do not unplug the AC adaptor by pulling its cable by hand. The cable may be damaged
causing a fire or electric shock. Always hold the AC adaptor itself.
•
Memory protection
-
Contents of the DT-X11 should always be backed up in personal computer to make a
separate record from that in the terminal. The contents of the memory may accidentally be
lost due to battery power consumption, etc. This also occurs when the terminal
malfunctions or is repaired.
-
When replacing the battery, always consult the operation manual. Improper battery
replacement may lead to unexpected loss or alteration of data.
•
Places for installing DT-X11
-
Do not place the DT-X11 in an environment with a significant amount of moisture or dust.
Otherwise, a fire or electric shock may occur.
-
Do not use the DT-X11 in the vicinity of a cooking table, humidifier, etc., where it will be
subjected to oily smoke or vapor. Otherwise, a fire or electric shock may occur.
-
Do not place the DT-X11 in an unstable situation, such as on a wobbling platform or shelf.
It may fall and cause personal injury.
-
Do not throw the DT-X11 into a fire. This may cause a fire or personal injury due to
explosion of the terminal.
