Operation Guide DQR-100
5
USING THE SUB-UNIT
Data Transfer from the Sub-unit
•
Data is transferred from the sub-unit to the main unit every three minutes.
•
The sub-unit is able to send data to the main unit up to an unobstructed distance of about 30 meters.
•
The data receive status is indicated on the display of the main unit by the icons shown below.
Receive successful
Receive unsuccessful
•
If a receive operation is not successful for some reason, the display of the main unit shows dashes (–) in place of
the sub-unit temperature value.
•
If you experience problems with data transfer, press the RE-SYNC button (
0
) to synchronize the two units. If
this does not eliminate the problem, try changing the positions or orientations of the main unit and sub-unit.
Switching between Celsius and Fahrenheit
•
Push the
°
C/
°
F button (
A
) to toggle between Celsius (
°
C) and Fahrenheit (
°
F).
Celsius (
°
C)
Fahrenheit (
°
F)
°
C/
°
F button (
A
)
Location
•
Place the sub-unit in a location where it will not be exposed to rain, direct sunlight, or other elements.
