background image

Overview and Setup

EN-4

• Note the important precautions below to avoid damage 

to the power cord.

During Use

• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or connector.

During Movement

• Before moving the Digital Piano, be sure to unplug the 

AC adaptor from the power outlet.

During Storage

• Loop and bundle the power cord, but never wind it 

around the AC adaptor.

• Never insert metal, pencils, or any other objects into 

the product’s DC12V terminal. Doing so creates the risk 
of accident.

• Do not try to use the power cord that comes with the 

product with another device.

• Plug the AC adaptor into a power outlet that is close to 

the Digital Piano. This lets you immediately unplug 
from the power outlet should any problem occur.

• The AC adaptor is intended for indoor use only. Do not 

leave it in a location where it can become wet. Also, do 
not place a vase or any other container of liquid on the 
AC adaptor.

• Make sure that the AC adaptor does not become 

covered with a newspaper, table cloth, curtain, or any 
other type of fabric.

• If you do not plan to use the Digital Piano for a long 

time, unplug the AC adaptor from the power outlet.

• The AC adaptor cannot be repaired. If your AC adaptor 

malfunctions or becomes damaged, you need to 
purchase a new one.

• AC Adaptor Usage Environment 

Temperature: 0 to 40°C 
Humidity: 10% to 90%RH

• Output Polarity: 

&

Using Batteries

• Be sure to turn off power before loading batteries.
• It is up to you to prepare six commercially available 

alkaline batteries.

• Note the precautions below while the Digital Piano is 

turned upside down to load batteries.
− Take care to avoid injury due to pinching your 

fingers under the Digital Piano.

− Do not allow the Digital Piano to tip over or otherwise 

be subjected to strong impact. Impact can damage 
the volume knob and keyboard keys.

1.

Open the battery cover on the bottom of the 
Digital Piano.

2.

Load six AA-size batteries into the battery 
compartment.

Make sure the positive 

+

 and negative 

-

 ends of the 

batteries are facing as marked on the Digital Piano.

3.

Insert the tabs of the battery cover into the 
holes along the side of the battery 
compartment, and close the cover.

Tabs

Содержание CDPS-100

























Отзывы: