Casio Cassiopeia A-20, Руководство по обслуживанию и список запасных частей

Страница: 14 / 80

— 11 —
RESET
You should reset the CASSIOPEIA whenever it stops working or whenever some other operational problem
has caused it to malfunction.
To reset the CASSIOPEIA
1. Press the RESET button with the stylus.
• This automatically turns off CASSIOPEIA power.
2. Press the power switch to turn on power and start the reset process.
• What happens next depends on memory status.
Case A: Memory Contents Not Corrupted
In this case, the display changes in the sequence shown below.
Normal operation is restored after the desktop appears, with all memory contents and settings unchanged.
Case B: Memory Contents Corrupted
In this case, the message “A problem with memory contents has been found, and memory must be initial-
ized...” appears on the screen. Use the stylus to touch the screen to change in the sequence shown below.
Set up the CASSIOPEIA as described on page 7 of this manual. The desktop appears after set up is
complete.
When memory is seriously corrupted, the above procedure deletes all data stored in memory. When
memory contents are not deleted*, save any data you need onto a computer disk or other medium
and then perform the full reset procedure on page 12.
*Data may be corrupted, so edit data after checking it.
Start up
screen
Nomal
Desktop
Start up
screen
Set up
screens