Operation Guide 2894
6
Historical Record
The historical record shows data for all save sessions performed since the
last time the historical record was cleared.
To view periodic records and current session record contents
1. Enter the Data Recall Mode.
2. Use the
C
and
A
to scroll through the data and display the one you
want.
Data Type
High Altitude
Low Altitude
Total Ascent
Total Descent
Description
Highest altitude reached during all
sessions.
Lowest altitude reached during all
sessions.
Total cumulative ascent during all sessions.
Total cumulative descent during all
sessions.
Screen Name
MAX
MIN
ASC
DSC
REC
(40)
REC
(2)
REC
(1)
MAX
MIN
ASC
DSC
REL
•
To view the current session record contents, use
C
to scroll forward past
the last periodic record (which will display the current session record
MAX
screen), or
A
to scroll back past the first periodic record (to the
REL
screen).
3. After you are finished viewing data, press
D
to exit the Data Recall Mode.
•
Dashes (
x
xxxx
) will be displayed if data has been deleted or if there is no
corresponding data due to error, etc. In such cases, total ascent and total
descent values will show zero.
Periodic
records
C
A
Current session
record
MAX
MIN
ASC
DSC
Historical record data items
C
A
To view historical record contents
1. Enter the Data Recall Mode.
2. Press
B
to display the historical record high altitude screen (
MAX
).
3. Use the
C
and
A
to scroll through the historical record screens as shown
below.
4. To return to the periodic record and current session screens, press
B
again.
5. After you are finished viewing data, press
D
to exit the Data Recall Mode.
Clearing the Historical Record
Use the following procedure when you want to clear the contents of the
historical record and restart all values from zero.
To clear the historical record
1. In the Data Recall Mode, press
B
to display
the high altitude data (
MAX
) of the historical
record.
2. Hold down
E
.
•
CLR
will appear in the upper part of the
display.
3. Keep
E
held down for an additional two
seconds until
CLR
starts flashing.
•
The historical record high altitude screen will
reappear when data deletion is complete.
•
If you release the
E
button part way through
the above procedure, the watch will return to
the historical record high altitude screen
without deleting the data.
World Time
World Time digitally displays the current time in
30 cities (29 time zones) around the world.
•
For full information on city codes, see the “City
Code Table”.
•
All of the operations in this section are
performed in the World Time Mode, which you
enter by pressing
D
.
Timekeeping Mode time
Current time in the zone
of the selected city code
To view the time in another city
In the World Time Mode, use
C
(east) and
A
(west) to scroll through city
codes (time zones).
•
When the currently selected time zone is one that includes mostly ocean, a
value indicating the zone’s Greenwich Mean Time differential appears in
place of a city code.
•
If the current time shown for a city is wrong, check your Home City time
settings and make the necessary changes.
To toggle a city code time between Standard Time and Daylight
Saving Time
1. In the World Time Mode, Use
C
(east) and
A
(west) to display the city code (time zone)
whose Standard Time/Daylight Saving Time
setting you want to change.
2. Hold down
E
to toggle between Daylight
Saving Time (
DST
indicator displayed) and
Standard Time (
DST
indicator not displayed).
•
The
DST
indicator appears on the display
whenever you display a city code for which
Daylight Saving Time is turned on.
•
You cannot toggle between Daylight Saving Time and Standard Time if the
displayed city code is
GMT
.
•
Note that the DST/Standard Time setting affects only the currently
displayed city code. Other city codes are not affected.
Stopwatch
The stopwatch lets you measure elapsed time,
split times, and two finishes.
•
The display range of the stopwatch is 9 hours,
59 minutes, 59.99 seconds.
•
The stopwatch continues to run, restarting from
zero after it reaches its limit, until you stop it.
•
The stopwatch measurement operation
continues even if you exit the Stopwatch Mode.
•
Exiting the Stopwatch Mode while a split time is
frozen on the display clears the split time and
returns to elapsed time measurement.
•
All of the operations in this section are
performed in the Stopwatch Mode, which you
enter by pressing
D
.
Minutes
Seconds
1/100
second
Timekeeping
Mode time
Hours
First runner
finishes.
Display time
of first runner.
Display time of
second runner.
Second runner
finishes.
Elapsed Time
C
C
C
C
A
Start
Stop
Re-start
Stop
Clear
Split Time
C
A
A
C
A
Start
Split
Split release
Stop
Clear
(
sp
displayed)
Two Finishes
C
A
C
A
A
Start
Split
Stop
Split release
Clear
To measure times with the stopwatch
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲