CCE – Cash Concepts Europe GmbH – Kemptener Straße 99 – 88131 Lindau
Tel. +49 (0) 8382 – 943 15 – 0 / Fax +49 (0) 8382 – 943 15 – 20 / [email protected]
CCE 4300 / CCE 4400
User Manual
Page [5]
0 – 9 „.“
Numeric keys: Input for counting stops
←↑→↓
Navigation and selection in the setup menu
OK
Confirmation of selection and entries
DETAIL
Switch to detailed counting result
Print to optional printer
CLEAR
1. Deleting the count result
2. Back to previous selection in setup
BATCH
Selection of batch functions 1, 2 and off (see
manual for batch function)
REV
Press and hold the button to reverse the
motor of the machine (e.g. in case of
blockages)
MODE
Selection of optional counting modes, these
are not available in all currencies.
M+
Saving the count result
MR
Reading the memory
SET
Keep key pressed for approx. 4 seconds to
open the setup menu
FUNC 1
FUNC 2
FUNC 3
These functions are optionally available for
individual currencies:
1: Counts old and new coins
2: Counts only new coins, Sorting out: old
coins
3: Counts only old coins, sorting out: new coins
STOP
START
Starting and stopping the counting process
Differences CCE 4300 / CCE 4400
The CCE 4400 has 10 coin boxes (9 for recognized coins + 1 for rejected coins). The CCE 4300 has 7 coin boxes (6 for recognized coins + 1
for rejected coins). When counting Euro coins, the CCE 4400 sorts all recognized coins according to their value, while the CCE 4300 sorts
the coins 1 cent and 2 cents uncounted into the reject pocket. All texts and graphics in the manual are based on the CCE 4400.
Initial operation
1.
Please observe the following notes during start-up and use of the machine in order to obtain an optimum counting result.
2.
Connect the mains plug to the socket.
3.
Now connect the power cable to the CCE 4300 / 4400 and switch it on.
4.
The machine carries out a self-test and shows the progress and the installed software on the display.
5.
Pour the coins onto the coin chute and feed the coins to the hopper in portions. Please make sure that no foreign objects (e.g.
paper remains from coin rolls) or foreign coins (other currencies) get into the machine.
6.
Please make sure that you do not exceed the filling mark in the hopper. If there are too many coins in the hopper, they cannot
be transported and sorted correctly.
7.
Press the "STOP/START" button and start the counting and sorting process. Fill the hopper with small quantities of coins. The
continuous filling of smaller quantities ensures a faster and better transport of the coins.
8.
The coins are now sorted into the individual coin compartments. When all coins have been counted and sorted, the counting
process stops automatically.
