background image

SAFETY PRECAUTIONS

15501   9-35990

SR2-2-6

OPERATE ONLY FROM THE DRIVER'S SEAT

Avoid possible injury or machine damage.

-

DO NOT

 start the engine by shorting across starter

terminals.

-

NEVER

 start the engine while standing on the track

or on the ground.

- Do not start the engine by shorting across starter

motor terminals.

- Before starting the engine, ensure that all control

levers are in the neutral position.

F4041

STARTING THE ENGINE WITH BOOSTER
BATTERIES

Battery gas may explode causing serious damages
and injuries.
- If the engine is to be started using booster

batteries, ensure to comply with all procedures
detailed in the chapter

 “OPERATING

INSTRUCTIONS”.

- The operator should be sitting in the driver’s seat

to keep the machine under control when the
engine starts. Starting the engine with booster
batteries  is a two man operation.

- Do not use batteries that have been stored in the

cold for a long time.

- Mistakes in following procedures detailed for

starting the engine with slave batteries may cause
the batteries to explode or machine to move
unexpectedly.

F1464

F2444

DO NOT CARRY RIDERS ON THE MACHINE

Riders on the machine are subject to injuries such
as being struck by foreign objects and being thrown
off the machine.

- Only machine operator is  allowed on the machine.

Keep riders off.

- Riders also obstruct the operator’s visibility,

resulting in the machine being operated 

unsafely

.

Содержание WX90




















































Отзывы: