FOREWORD, SAFETY, PLATES AND DECALS
1-7
BEFORE OPERATING THE MACHINE
Read and assimilate the instructions and warnings
shown in this manual before operating the machine.
The presence of grease, oil, mud or (in winter) ice
on the steps and access handles can cause acci-
dents. Make sure they are always clean.
Remove anything which might hinder visibility.
Clean the windshield, windows and rear view mir-
rors.
Before travelling or working at night, check that the
lighting and signalling systems are operating cor-
rectly.
Make sure the doors and the engine guard are cor-
rectly fastened before undertaking any travel.
Make sure that no loose object or tool is left on the
machine or in the operator’s compartment.
When mounting or dismounting from the machine
always face the machine and use the steps and
access handles on the left-hand side of the
machine.
Wear close fitting clothing and safety equipment
appropriate for the job.
It is necessary to have at disposal:
- safety helmet;
- safety shoes;
- safety goggles, or face shield;
- heavy gloves;
- hearing protection;
- reflective clothing;
- wet weather clothing;
- respirator or filter mask.
Wear close fitting clothing and safety equipment
appropriate for the job. Do not leave anything to the
case. Avoid wearing loose clothing, jewellery, or
other items that can catch on control levers or other
parts of the machine.
To operate the machine in full safety, the operator
should be completely careful. Do not wear radio or
music headphones while operating machine.
S
DANGER
S
The operator should be the only person on the
machine. Make sure there is nobody on or near the
machine.
4
5
