FOREWORD, SAFETY, PLATES AND DECALS
1-3
SAFETY INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS
Carefully read the safety rules contained herein and
follow advised precautions to avoid potential haz-
ards and to safeguard your safety and personal
integrity.
In this manual you will find the following indications:
The non compliance with the warning preceded by
the above mentioned key-words (
WARNING
and
DANGER
) can cause serious accidents or even the
death of the persons involved.
Moreover in the present Manual have been given
some instructions with texts in italics, preceded by
the words
NOTE
and
CAUTION
:
NOTE:
it emphasizes and underlines to the opera-
tor the correct technique or correct procedure to fol-
low.
Your safety and that of people around you depends
on you. It is essential that you understand this man-
ual for the correct operation, inspection, lubrication
and maintenance of this machine.
Pay particular attention to the “Fundamental safety
instructions” and to all warnings and safety instruc-
tions attached to the machine.
Familiarize yourself with the machine operation and
the operating patterns of the control elements prior
to starting up the machine.
The operators must be fully informed about the
operation and application of this or comparable
machines.
The safety messages in this section concern situa-
tions which may arise during normal machine oper-
ation and maintenance. These safety messages
also indicate the different ways of coping with these
situations. Other safety messages are used
throughout the manual to indicate specific dangers.
Always keep this manual in the storage compart-
ment provided for it. Make sure that it is always
complete and in good condition. Consult your
Dealer to obtain extra manuals.
S
WARNING
S
This symbol warns about the possibility of potential
damages to the machine that can involve the oper-
ator’s safety.
S
DANGER
S
With specific warnings about potential dangers for
the operator’s or other persons integrity directly or
indirectly involved.
S
CAUTION
S
It warns the operator of a possible hazard of
machine damage in case he does not follow a
determined procedure.
