Case CX135SR, Руководство оператора

Страница: 118 / 186

CHAPTER 5 - LUBRICATION, FILTERS, AND FLUIDS
5-36
Issued 8-04 Bur 6-34551NA
CS98M619 Figure 94
CX75SR, CX80
To access the filter, open the rear right-hand side
door.
CT02D081 Figure 95
CX135SR
To access the filter, open the rear right-hand side
door.
CT02D085 Figure 96
CLEANING AND REPLACEMENT OF THE INLET
FILTER
1. Release all pressure in the hydraulic reservoir.
S e e R e l e a s i n g P re s s u r e i n t h e H y d ra u l i c
System.
2. Clean the top of the hydraulic reservoir and clean
the inlet filter cover.
3. Remove the cover (1), O-ring (2) and spring on
the top of the inlet filter rod assembly.
4. Remove the inlet filter (3) and clean with solvent.
Dry it completely and check it for any damage. If
there is any damage on the surface, replace it
with a new one.
5. Install a new O-ring (2) and install the inlet filter
(3), spring and rod assembly.
6. Install the cover (1).
7. Check the level of the hydraulic fluid and add
more if necessary. See Filling the reservoir.
NOTE: Install a new inlet filter every 5000 hours of
operation or when the hydraulic fluid is replaced.
CI98M156 Figure 97
CX75SR, CX80
To access the filter, see Accessing the Hydraulic
Reservoir.
Loosen the 4 screws (1) and remove the plate (2).
CT02D068 Figure 98
CX135SR
To access the filter, remove the screws and the upper
plate.
1
3
2
4
2
1
3
2 1