Cascade Sciences CDO-5-2, Руководство по установке и эксплуатации

Страница: 32 / 44

32 | P a g e
cascadesciences.com | Tel. 503 847-9047
OPERATION
S
ET THE
T
EMPERATURE
S
ETPOINT
Adjust the oven temperature setpoint to that of your application.
Do not use mesh bags at temperatures exceeding 240°F (115°C). Only use heat-resistant, non-
outgassing, FDA compliant mesh bags.
End of Procedure
1.
Navigate to the Temperature Setpoint Adjustment mode
Press
and hold
either
Set Temperature
Setpoint Adjustment Mode
Current Setpoint
•
The display will briefly flash the letters “SP”, then show the flashing,
adjustable temperature setpoint.
Note : The display will automatically exit the adjustment mode after 5 seconds
of inactivity, with the last shown setpoint value saved.
2.
Set the Temperature Setpoint
Adjust
Set Temperature
New Setpoint
Note: To prevent the oven from heating, push the down arrow button repeatedly
until the display shows “OFF”. The lowest programmable setpoint is 77°F.
3.
Wait for 5 seconds after entering the Setpoint
Set Temperature
•
The display will stop flashing. The setpoint is now saved in the controller.
•
The oven will now automatically heat or passively cool to match the
setpoint.
•
The display will revert to showing the current chamber air temperature.
HEATING ACTIVATED