Cascade Sciences CDO-5-2, Руководство по установке и эксплуатации

Страница: 30 / 44

30 | P a g e
cascadesciences.com | Tel. 503 847-9047
OPERATION
Timed Heating Profile
The oven is provided with a timer system that can run the oven in a steady-state heating profile at the
current temperature setpoint from 1 minute up to 99 hours, 59 minutes. Allow the oven to heat to
temperature prior to launching the profile. Launching a profile with the temperature setpoint set to 240°F
immediately after turning on the oven will result in the first 22 minutes of the profile being spent with the
chamber rising from room temperature to 240°F.
When the timer system is on, the oven will not heat unless a profile is running.
The Over Temperature Limit System
The oven is equipped with a heating cutoff system which automatically cuts off electricity to the oven
heating elements when the chamber air temperature exceeds 356°F (180°C). This is intended to help
prevent runaway heating in the event of a controller failure or if an outside temperature source
generates a heat spike in the oven chamber. The Over Temperature Limit heating cutoff is a
mechanical system that operates independently of the main digital temperature control system and
comes equipped with its own hydrostatic temperature probe located in the oven chamber.