Casals QUANTICA EEC, Инструкция по установке, эксплуатации и обслуживанию

Страница: 47 / 56

47
EN
18.3 Turn
ON
the unit and setting parameters
(CONTROL EVO COP and CONTROL EVO CAV)
LCD REMOTE GRAPHIC DISPLAY
(CONTROL EVO COP and CONTROL EVO CAV versions only)
Once the unit is powered and the main switch is activated,
the display turns on and shows the “
Unit OFF BY KEYBOARD
”
screen, the unit is turned off by key. From this screen, it is
necessary to press and hold the “
ON/STAND-BY
” key in order
to activate the unit and go to the main screen.
UN
IT S
TA
RT
M
AI
N S
CR
EE
N
When the unit starts, the display is similar to the one you can
see above. From this screen it is possible to access to all the
menu following explained. From the main screen, through press
and hold of the “
OK
” key, the USER MENU is accessible.
PRESS
AND HOLD
US
ER M
EN
U
The user menu can be accessed through the display main screen
and it does not need Password.
In this menu are there the parameters that the user can freely
modify and will following explained.
In order to see the parameters on the USER MENU, press again
the “
OK
” key (simple pressure). By pressing the “
DOWN
” key,
all parameters are listed displayed.
To change the operation mode:
• press the ”
OK
” key, the value blinks;
• press the ”
UP
” or ”
DOWN
” keys to change the parameter;
• confirm with ”
OK
” key.
“
Sum.
” =
SUMMER
“
Win.
” =
WINTER
OP
ER
AT
ING
M
ODE
SU
M
M
ER
SE
T-
PO
INT
To change the summer set-point:
• press the ”
OK
” key, the value blinks;
• press the ”
UP
” or ”
DOWN
” keys to change the parameter;
• confirm with ”
OK
” key.
W
IN
TE
R
SE
T-
PO
INT
To change the winter set-point:
• press the ”
OK
” key, the value blinks;
• press the ”
UP
” or ”
DOWN
” keys to change the parameter;
• confirm with ”
OK
” key.
x 16 TIMES
PRESS
AND HOLD