• Most sand paper sheets are sold in A4 size,
if an A4 sheet is folded in 3 sections vertically
and cut to size you will be able to punch the
paper for use.
• Place sand paper section on plate and press
down with the orbital sander.
• Holes in the sheet allow for dust to be sucked
upwards and through to the extraction dust
shoot.
Inserting and removing sand paper.
Fitting sanding sheets
•Open the paper clamps (4).
•Take sanding paper of the required grain size
and place it on the sanding pad (5).
•Make sure that the perforation in the paper
correspond with those on the sanding pad.
•Fold the sanding paper at both ends around
the edges of the sanding pad.
• Close the paper clamps one by one.
•Make sure that the ends of the sanding paper
is clamped in place.
Switching on and off
• To switch on the machine, press the on/off
switch (1).
• To switch off the machine, release the on/off
switch.
• To switch the machine to continuous mode,
keep the on/off switch (1) pressed in and simul-
taneously press the lock button (2).
•To switch off continuous mode, press the on/
off switch (1) again.
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance. Regularly clean the ventilation
slots.
OS150-Obital Sander.indd 4
2013/04/18 11:47:37 AM
