Casall Benefit B420, Инструкция по сборке, Страница: 11 / 14

11
Monitor manual instruction
ST7610-7
FUNCTION BUTTON
MODE Press "Mode" button to preset TIME, DISTANCE, CALORIES and PULSE.
Press "Mode" button for selection, or enter after setting up.
SET To set up the value of TIME, DISTANCE, CALORIES and PULSE. You can hold the
button to increase the value faster. (The monitor has to be in stop condition.)
RESET The user may press "RESET" button to reset each function: Time, Distance, Calorie,
Pulse or hold on for 2 seconds for total reset.
(When the user replace batteries, all the values will reset to ZERO automatically.)
RECOVERY To act the heart rate recovery function after training.
FUNCTIONS
SCAN Display all function from RPM - SPEED - DISTANCE - CALORIES - PULSE.
RPM Displays the Rotation Per Minute. The RPM and SPEED will switch to another display
in every 6 seconds after exercise starts.
TIME Accumulates workout time from 00:00 up to 99:59. The user may preset target time
pressing SET button. Each increasement is 1 minute.
SPEED Displays current training speed. Maximum speed is 99.9 KM/H or MILE/H.
DISTANCE Accumulates total distance from 0.00 up to 99.99 KM or MILE. The user may preset
target distance by pressing SET button. Each increasement is 0.1KM or MILE.
CALORIE Accumulates calories consumption during training from 0 to maximum 9999 calories.
(This data is a rough guide for comparison of different exercise sessions which can
not be used in medical treatment.)
PULSE After you hold two hands to the handgrip sensors, the monitor will display your current
heart rate figures. Before training starts, you may set up a target figure, when the heart
rate is exceed to this target, the monitor will show a blink heart rate symbol to remind
you.
TEMPERATURE Displays current room temperature from 0
℃
to 60
℃
.
OPERATION ORDER
1. Installs 2 pieces of 1.5V #3 batteries, then the screen will display as following