5
Item What it is
What it does
1
NVR Screen
10.1” LCD panel
2
Microphone
Captures the sound on monitor and transmits the sound from
monitor to camera. (Intercom)
3
Power Indicator
The indicator LED will turn on when NVR is powered
4
HDD Indicator
The indicator LED will turn on when HDD is installed
5
NVR Antenna
Transmitting wireless signal with wireless camera.
6
HDMI port
Connect the HDMI cable
7
USB port
Connect the mouse to control the NVR or connect to USB storage
for back up.
8
RJ-45 port
Connect the Ethernet cable to get access to enable
Smartphone/tablet connectivity.
9
Power port
DC 12V power port. Connect to a local power outlet using te
included 12V power adapter.
10
Speaker
Produces the sound transmitted from cameras.
11
Screen ON/OFF &
Auto Config Button
* Press the button to turn ON/OFF the screen (enter/exit power
save mode, with only audio on)
* Press and Hold the button to use the AUTO CONFIG setting.
When you adjust the display resolution, displayed picture may not
in the center of the screen. In this case, you can use auto config to
adjust the picture to central position.
12
NVR Stand
Stand the NVR on table or other flat surfaces. You can also mount
the stand to the wall.
13
HDD compartment
Open up the cover to install the HDD (2.5"). Close the cover after
installation
