17
1. Click the channel you want to pair the camera to, click
Pair.
2. Check the status of camera working indicator:
Quick flashing: under pairing mode
Slow flashing: unpaired or out of range
Solid green: paired
Please make sure the camera is powered on, then press and hold the pair button ( on the back of the
camera) about 5 seconds until the working indicator light turn off, then wait until the working indicator
is flashing quickly, means the camera is ready to pair.
3. Check the NVR screen, when the camera is under pairing mode, NVR will search the IP and display it
on the screen, that means the camera and NVR are paired.
You can also check the working indicator of the camera, solid green light means well paired.
4. Click
exit
and back to LIVE VIEW screen.
NOTE
:
Make sure the camera is powered on before pairing.
If a camera is already paired to the channel, while you want to re-pair the camera to the NVR, please
delete the existing channel on the NVR first.
Delete
Select the channel and click
Delete
, the camera will be deleted from NVR.
Delete All
Click here all the channels will be deleted.
Repeater
When the distance between camera and NVR is beyond the transmission range, you can use the
Repeater
function to expand the transmission range.
1
Click
to enter repeater setting surface. The system will check the current net connection
status automatically, please wait until display
“DONE”
, then click
OK
to enter the setting surface.
