FILE NAME ( SM_VersaTouch.pmb ras 04-01-03303303)
Casablanca Fan Co. - Factory Service Department - Technical Library
Chapter (5)
V- 5.26
Top of fan shown with top cover removed you will now
have access to receiver. Remove the two screws holding
down receiver to mounting plate and remove screw that
is holding down antenna that is attached to mounting plate
save all these screws for securing new receiver.
Disconnect the motor and receiver pin connectors.Also
disconnect the light circuit connectors from receiver. The
receiver can now be removed and replaced with the new
receiver.
Caution :
Always turn power off before working
on fan turn off circuit breaker or remove circiut
fuse.
Install new receiver and secure with screws that were
removed from the receiver that was replaced secure an-
tenna to mounting plate. Reconnect the motor, receiver
and light circuit connectors. Make sure that dip switch
settings on receiver are matched to hand held transmit-
ter before replacing top cover.
Electronics PC Board (Transmitter)
-
CONTINUED