FILE NAME ( SM_VersaTouch.pmb ras 04-01-03303303)
Casablanca Fan Co. - Factory Service Department - Technical Library
Chapter (5)
V- 5.25
Disconnect the motor and receiver pin connectors. Also
disconnect the light circuit connectors and antenna. The
receiver can now be removed and replaced with the new
receiver.
Caution : Always turn off power before
working on fan turn off circuit breaker
or remove circiut fuse .
After removing top cover from fan you will now have acess
to receiver. Remove the two screws that are holding down
receiver to mounting plate and remove screw on antenna
that is attached to mounting plate. Note save these screws
you will need them to secure the new receiver.
Electronics PC Board (Transmitter)
-
CONTINUED
Electronics PC Board (Transmitter)
-
CONTINUED
RECEIVER REPLACEMENT PROCEDURE
( Molex Type Connector )