10
11
C
onCert
B
reeze
INSTALLING FAN ADAPTOR
INSTALLING ON A FAN WITH PULL CHAIN REVERSING
Adaptor
Chain Guide
Adaptor Screws
Step 1. Install adaptor to bottom of fan by
aligning pegs on the adaptor with the holes on the
bottom of the fan switch housing.
Step 2. Attach adaptor by installing two adaptor
screws.
Step 3. Securely tighten.
Step 1. Select location to install chain guide
aligning reverse pull chain and chain guide.
Step 2. Remove #8 pan head screw.
Step 3. Install chain guide with #8 pan head screw
removed from step 2.
Step 1. Remove the protective ring foam.
Step 2. Remove the three lower bulbs from their
packaging, and install into the light kit.
Note: When replacing bulbs, only replace with max
40 watt bulbs.
Adaptor Screw
Peg
#8
Pan Head
Screw
#8
Pan Head
Screw
Chain Guide
Steps 1-3
Step 2
Step 3
WIRING AND INSTALLING LIGHT KIT/ SPEAKER
Cap Assembly
Screws
Wire
Connectors
Step 1. Connect the black wire from the light kit/
speaker and the blue wire from the canopy.
Step 2. Connect the white wire from the light kit/
speaker and the white wire from the canopy.
Step 3. Secure all wire connections using wire
connectors.
CAUTION: Be sure no bare metal wires or wire
strands are visible after making the connections.
Steps 1-3
Steps 4-6
Step 4. Lift the light kit/speaker to the adaptor on
the bottom of the fan switch housing.
Step 5. Align the side screw holes in the adaptor
and the cap.
Step 6. Attach the light kit/speaker with three cap
assembly screws.
COMPLETING INSTALLATION OF LIGHT KIT
INSTALLING LIGHT BULBS AND GLASS
Step 3. Place glass bowl over the light kit/speaker
assembly, ensuring the threaded portion of the light
kit/speaker assembly comes out of the bottom of the
glass.
Step 4. Place the finial over the threaded portion
of the light kit/speaker assembly and twist it as
clockwise until tight against the glass bowl.
Steps 1-2
Steps3-4
