background image

4

5

C

onCert

 B

reeze

RECORD MODEL NUMBERS BEFORE INSTALLATION! 

Please take a moment to locate the model number from your Concert Breeze (see below) and record this 
information on the Warranty page inside the front cover of your Owner’s Manual if it does not appear there 
already. These numbers are found on the motor identification plate affixed to the fan motor in the location 
shown below:

PLEASE INSPECT ALL PACKAGING PRIOR TO DISCARDING!
Your Casablanca accessory was crafted with pride and care and inspected thoroughly 
prior to shipment. Before you begin to assemble and install your Casablanca accessory, 
remove all parts from the carton and check them against the Parts Guide in this manual.
Make sure all parts are included in the box using the Parts Guide on the following pages.

If there are missing or broken parts: 
Call 1-888-227-2178 Monday through Friday, 8 a.m. 
to 4:30 p.m. CT. Your request will be handled 
immediately. Replacement parts will be sent to you 
via Federal Express.

Proper Parts Handling

Do not remove lightbulbs from their packaging 
until you are ready to install them. 

Before discarding packaging materials, be certain 
that all parts have been removed. 

Use a clean, dry paintbrush to remove small 
Styrofoam pieces that may remain after unpacking.

Do not brush Styrofoam into wiring cavities. 

Always turn power to the light kit OFF before 
replacing lightbulbs.

If the light kit does not work:

Refer to the Troubleshooting Tips in this Owner’s 
Manual.

Call Technical Support at 1-888-227-2178.
Contact your local Authorized Service Center.
Our Web site at www.casablancafanco.com 
contains additional information on Casablanca 
products, troubleshooting, and Authorized Dealer 
or Service Centers. Please do not return this 
product to the store.

Model Number

Circuit Breaker

(Trip breaker for the

circuit you will be

working on)

Fuse Box

(Remove fuse for the

circuit you will be

working on)

SAFE USE

OPTIONAL ACCESSORIES

• CAUTION: RISK OF ELECTRICAL SHOCK!  Installation is to be in accordance with the National Electrical 

Code, ANSI/NFPA 70-1999 and local codes. If you are unfamiliar with the wiring codes, you should use 
a qualified electrician.  To avoid overheating and possible damage to other equipment, do not install 
control to a receptacle, fluorescent light fixture, motor-operated appliance, or transformer-supplied 
appliance.

•  This light kit requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. 

Maximum light current is 1 amp or 120 watts of lighting.

• Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the 

canopy, make sure all wires are within the canopy and that no wires are being pinched.

INTRODUCTION

•  Inspect the contents of your carton for possible 

shipping or handling damage. If parts are missing 
or damaged, call 1-888-227-2178.

•  It is always a good idea to have an assistant to 

help with the installation.

•  Always turn the power OFF to the light kit before 

replacing lightbulbs. 

•  Contact Casablanca Fan Company by calling  

1-888-227-2178, or contact your local authorized 
Casablanca dealer for assistance in obtaining 
service.

BEFORE YOU START

This light kit is compatiable with these Casablanca Fans:

 Barolo, Brescia, Capistrano,Concentra, Cottage, Estrada, Heritage, Holliston, Key Largo II, 

Lanai, Malibu Star, Metropolitan, Panama, Utopian, Ventura, Victorian and Wailea

It is also compatiable with many Hunter Ceiling Fans. Please check with an Authorized dealear 

for compatiable models. 

Consider using Soundelier's® optional accessories, which include Wireless Subwoofers and Duo™ Lamps. 

Optional accessories can be purchased through Casablanca Authorized Dealers.

Содержание Concert Breeze











Отзывы: