16
17
a
ntion
™
FIGURE_4.
FIGURE_5.
FIGURE_6.
FIGURE_7.
Step_6._ To attach the Light Kit, partially install
three Light Kit Screws into the Glass Fitter Plate.
Figure 4.
Step_7._ Plug the Molex Plug from the Light Kit into
the Opposite end from the Fan.
Step_8._ Align the keyhole slots in the Light Kit
with the Light Kit Screws. Figure 5.
Step_9._ Turn the Light Kit counterclockwise until
the Light Kit Screws are firmly situated in the
narrow end of the keyhole slots.
Step_10._ Install the remaining screw into the Glass
Fitter. Figure 6.
Step_11._ Tighten all 4 screws firmly.
Step_12._ Install both Halogen Bulbs into the Light
Kit. Figure 7.
Note: When replacing bulbs, only replace with max
50 watt bulbs.
IMPORTANT ! When installing the halogen bulb,
carefully cut off the end of the plastic sleeve the bulb
comes in and hold the bulb by the plastic sleeve to
screw it into the socket.
Step_13._ Raise the Glass up to the Glass Fitter above
the Light Kit.
Step_14._ Slide the Glass Cover onto the bottom of
the glass
Step_15._ Screw the Finial onto the bottom of the
Light Kit Stem to secure Light Kit.
Stem
Cover
Finial
Glass Fitter
