M8502-01 • 11/21/12
M8502-01 • 11/21/12
1.888.830.1326
1.888.830.1326
8
9
Lift the light kit assembly up so that the
screw holes in the lower switch housing
line up with the holes in the upper switch
housing. Install the switch housing
screws and tighten securely.
Upper
Switch
Housing
Using the single pin connectors, connect the
black or blue wire from the fan to the black
wire from the light kit. Connect the white
wire from the fan to the white wire from the
light kit.
Feed the wires through the switch
housing cap, washer, and nut. Then
install the switch housing cap by twisting
clockwise onto the threaded rod, making
sure the gasket stays in line with the top
of the light kit. Install the washer and nut
onto threaded rod and tighten securely.
Threaded
Rod
Washer
and Nut
TYPE-C ASSEMBLY INSTRUCTIONS (CONTINUED)
TYPE-C ASSEMBLY INSTRUCTIONS
If your fan does not have pin connectors
on the wires coming from the switch
housing, install the wiring harness
provided. Using the provided wire
connectors connect the white wire from
the fan to the white wire from the wire
harness and connect the black or blue
wire from the fan to the black wire from
the wire harness.
1
3
2
4
Wire
Connector
Switch
Housing
Do not allow the light kit to hang
only by the wire connections!
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Installing the bulb - Install a bulb into each
socket. When necessary, replace bulbs with
bulbs of same type and wattage.
Installing the shades (sold separately)-
Remove the socket rings from the
sockets. Install each shade onto a socket.
Install the socket rings onto the sockets
by turning them clockwise using the
socket ring tool.
Socket
Ring Tool
Socket
Ring
Shade
(sold separately
Socket
ON
Turn
Pow
er
Turn on power. Your installation
is complete!
7
6
8
5
