Screen Lock
Press and hold the and key together for 3 seconds to lock thermostat screen
and prevent modification of the thermostat's settings. A pad-lock symbol will be displayed.
Repeat same action to unlock it.
Default Settings
Short press “Default” key to recover Factory Defaults.
Factory Reset
Short press “Reset” key to reset thermostat.
Casa Group Ltd, PO Box 35353, Browns Bay, Auckland
Free Call: 0800 00 22 72, [email protected]
www.casaheating.co.nz
Advanced Settings (Functions F0 - F4)
Advance settings mode allow you to fine tune your controller.
To access advance settings long press and together for 3 seconds.
Use and keys to select desired function and to enter or confirm your choice.
Below is the list of advanced setting functions and available options.
Orange coloured represent default values.
F0 - Temperature Calibration
Calibrate temperature from -15 C
0
F1 - Sensor Choice
2 - External sensor (in floor)
- Internal sensor (in unit)
1
0 - Combined internal and external sensor
F2 - Program Backup Function
0 - Backup not active
- Backup Active
1
F3 - Temperature Control Band
When desired temperature is achieved controller will switch off
heater and start again when temperature drops.
Choose between 1, , or 3 degrees
2
F4 - Choose Manual or Auto mode for towel rail
ON - Manual mode only
Auto mode with manual override
OFF -
DONE
MENU
