Casa Nuova 4, Руководство по эксплуатации

Страница: 34 / 36

12.2 Name plate
12.2.1 Name plate – Nursing bed
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
The name plate is attached to the end of the nursing bed
and indicates the following data:
12.2.2 Name plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
C
A
B
The name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patient
lifting pole and indicates the following data:
The name plate is attached to the mattress support
Name plate is attached to the mattress support.
A
Warning information about the max. weight bearing
capacity of the patient lifting pole.
B
Article designation
C
Caution! Observe the operating manual.
Casa Med Clas c (FS) / Casa Med Classic Low / Casa Med Ultra (FS) – 15.09.2011
G
B
G
B
G
B
G
B
same data would apply to Casa Med Ultra, Ultra FS, Casa
Med Classic Low. However name would change.
Casa Med Classic 4 / Classic FS / Casa Med Ultra / Casa Med Ultra FS / Casa Med Low 01.01.2012
GB – 32
12.2 Name plate
12.2.1 Name plate – Nursing bed
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
The name plate is attached to the end of the nursing bed
and indicates the following data:
e plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
C
A
B
T
he name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patien
lifting pole and indicates the following data:
The name plate is attached to the mattress support
A
Warning information about the max. weight bearing
capacity of the patient lifting pole.
B
Article designation
C Caution! Observe the operating manual.
12.2 Name plate
12.2.1 Name plate – Nursing bed
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
The name plate is attached to the end of the nursing bed
and indicates the following data:
12.2.2 Name plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
C
A
B
The name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patient
lifting pole and indicates the following data:
The name plate is attached to the mattress support
Name plate is attached to the mattress support.
A Warning information about the max. weight bearing
capacity of the patient lifting pole.
B Article designation
C Caution! Observe the operating manual.
Casa Med Classic (FS) / Casa Med Classic Low / Casa Med Ultra (FS) – 15.09.2011
Casa Med Classic 4 / Classic FS / Casa Med Ultra / Casa Med Ultra FS / Casa Med Low 01.01.2012
Protection class II (protective insulation)
12.2 Name plate
12.2.1 Name plate – Nursing bed
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
The name plate is attached to the end of the nursing bed
and indicates the following data:
12.2.2 Name plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
C
A
B
The name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patien
t
lifting pole and indicates the following data:
The name plate is attached to the mattress support
Name plate is attached to the mattress support.
A Warning information about the max. weight bearing
capacity of the patient lifting pole.
B Article designation
C Caution! Observe the operating manual.
Casa Med Classic (FS) / Casa Med Classic Low / Casa Med Ultra (FS) – 15.09.2011 Casa Med Classic 4 / Classic FS / Casa Med Ultra / Casa Med Ultra FS / Casa Med Low 01.01.2012
CE certification in accordance with 93/42 // /EEC
Type B Applied TT Part
12.2 Name plate
12.2.1 Name plate – Nursing bed
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
The name plate is attached to the end of the nursing bed
and indicates the following data:
12.2.2 Name plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
C
A
B
The name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patient
lifting pole and indicates the following data:
The name plate is attached to the mattress support
Name plate is attached to the mattress support.
A Warning information about the max. weight bearing
capacity of the patient lifting pole.
B
Article designation
C Caution! Observe the operating manual.
Casa Med Classic (FS) / Casa Med Classic Low / Casa Med Ultra (FS) – 15.09.2011
G
B
G
B
G
B
Casa Med Classic 4 / Classic FS / Casa Med Ultra / Casa Med Ultra FS / Casa Med Low 01.01.2012
Degree of Protection
12.2 Name plate
12.2.1 Name plate – Nursing bed
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
The name plate is attached to the end of the nursing bed
and indicates the following data:
12.2.2 Name plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
C
A
B
The name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patient
lifting pole and indicates the following data:
The name plate is attached to the mattress support
Name plate is attached to the mattress support.
A Warning information about the max. weight bearing
capacity of the patient lifting pole.
B Article designation
C Caution! Observe the operating manual.
Casa Med Classic (FS) / Casa Med Classic Low / Casa Med Ultra (FS) – 15.09.2011 Casa Med Classic 4 / Classic FS / Casa Med Ultra / Casa Med Ultra FS / Casa Med Low 01.01.2012
Caution! Observe the operating manual
12.2 Name plate
12.2.1 Name plate – Nursing bed
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
The name plate is attached to the end of the nursing bed
and indicates the following data:
12.2.2 Name plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
C
A
B
The name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patient
lifting pole and indicates the following data:
The name plate is attached to the mattress support
Name plate is attached to the mattress support.
A
Warning information about the max. weight bearing
capacity of the patient lifting pole.
B Article designation
C Caution! Observe the operating manual.
Casa Med Classic (FS) / Casa Med Classic Low / Casa Med Ultra (FS) – 15.09.2011 Casa Med Classic 4 / Classic FS / Casa Med Ultra / Casa Med Ultra FS / Casa Med Low 01.01.2012
Maximum continuous operation of the
actuator motors = 2 minutes 18 minutes
minimum pause after 2 minutes
12.2 Name plate
12.2.1 Name plate – Nursing bed
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
The name plate is attached to the end of the nursing bed
and indicates the following data:
12.2.2 Name plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
C
A
B
The name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patient
lifting pole and indicates the following data:
The name plate is attached to the mattress support
Name plate is attached to the mattress support.
A Warning information about the max. weight bearing
capacity of the patient lifting pole.
B Article designation
C Caution! Observe the operating manual.
Casa Med Classic (FS) / Casa Med Classic Low / Casa Med Ultra (FS) – 15.09.2011
Casa Med Classic 4 / Classic FS / Casa Med Ultra / Casa Med Ultra FS / Casa Med Low 01.01.2012
Note on disposal
12.2 Name plate
12.2.1 Name plate – Nursing bed
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
The name plate is attached to the end of the nursing bed
and indicates the following data:
12.2.2 Name plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
C
A
B
The name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patient
lifting pole and indicates the following data:
The name plate is attached to the mattress support
Name plate is attached to the mattress support.
A Warning information about the max. weight bearing
capacity of the patient lifting pole.
B Article designation
C Caution! Observe the operating manual.
Casa Med Classic (FS) / Casa Med Classic Low / Casa Med Ultra (FS) – 15.09.2011
G
B
G
B
G
B
Casa Med Classic 4 / Classic FS / Casa Med Ultra / Casa Med Ultra FS / Casa Med Low 01.01.2012
On ME Equipment
‘follow instructions for use’.
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
12.2.2 Name plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
AB
2 min/
18 min
C
A
B
The name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patient
lifting pole and indicates the following data:
The name plate is attached to the mattress support
Name plate is attached to the mattress support.
A Warning information about the max. weight bearing
capacity of the patient lifting pole.
B Article designation
C Caution! Observe the operating manual.
Casa Nuova 4 / Casa Nuova Bariatric Casa Nuova 4 / Casa Nuova Bariatric
June 2017
200 kg 180 kg
12.2 Name plate
12.2.1 Name plate – Nursing bed
12.2.4 Name plate – Detachable Parts of a medical
bed of a mass of more than 20 Kg
12.2.5 name plate – Replacement Mattresses
The name plate is attached to the end of the nursing bed
and indicates the following data:
12.2.2 Name plate – Patient lifting pole
12.2.3 Name plate – maximum patient weight &
safe working load
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
C
A
B
The name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patient
lifting pole and indicates the following data:
The name plate is attached to the mattress support
Name plate is attached to the mattress support.
A Warning information about the max. weight bearing
capacity of the patient lifting pole.
B Article designation
C Caution! Observe the operating manual.
Casa Med Classic (FS) / Casa Med Classic Low / Casa Med Ultra (FS) – 15.09.2011
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
T
he name plate is attached at
The name plate is attached to the
head and foot posts.
the bottom of the patien
t
lifting pole and indicates the following data:
The name plate is attached to the mattress support
A
Warning information about the max. weight bearing
capacity of the patient lifting pole.
B
Article designation
C Caution! Observe the operating manual.
Protection class II (protective insulation)
Application part type B
Protection type (splash-proof)
Caution! Observe the operating manual
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
IP44
AB
2 min/
18 min
T
A
Warning information about the max. weight bearing
capacity of the patient lifting pole.
B
Article designation
C
Caution! Observe the operating manual.
Casa Med Classic (FS) / Casa Med Classic Low / Casa Med Ultra (FS) – 15.09.2011 Casa Med Classic 4 / Classic FS / Casa Med Ultra / Casa Med Ultra FS / Casa Med Low 01.01.2012
Maximum continuous operation of the
actuator motors = 2 minutes
18 minutes minimum pause after
2 minutes
Note on disposal
AB
2 min/
18 min
C
A
B
T
A Warning information about the max. weight bearing
capacity of the patient lifting pole.
B Article designation
C Caution! Observe the operating manual.
a 3
CN4
317 kg BARIATRIC
name pla
286
nam nam e e p p
k
l l
g
a a
g
a a