2
Casa Command
ARRIS Command
configure image to load on
next reboot
system bootdev nvram
ccsi.gz.rel7.7.0.0_build4479
reload <image file>
reload commit
reboot system
system reboot
reload
view system module status
show system
Enable LACP
configure trunking
interface trunk <
trunk #
>
<interface>
mode active
<interface>
mode active
no shutdown
configure interface link-aggregate <
0-7
> min-
links
<1-8>
configure interface link-aggregate
<0-7>
lacp
mode enable
configure interface Ethernet
<6/7>/<0-7>
link-aggregate
<0-7>
configure interface link-aggregate
<0-7>
shutdown no
view LACP information
show lacp summary
show lacp [6/7] [{counters \ local \ partner \
sys-id}]
Configure a VLAN with the
Trunk as an Interface
interface vlan
<vlan id>
trunk
<trunk #>
ip address
<ip address> <mask>
ipv6 address
<ipv6 address>
/64
bdf interval 100 min_rx 100
multiplier 4
no shutdown
Configure a Loopback
Interface
interface loopback
<#>
ip address
<loopback ip address>
255.255.255.255
configure interface loopback
<0…13>
ip
address
<ipaddress>
/32 shutdown no
Configure DHCP Relay for
CMs and CPEs
interface ip-bundle
<#>
ip address
<ipaddress> <mask>
ip address
<ip address> <mask>
secondary
cable helper-address
<dhcp server
ip address>
ipv6 address
<ipv6 address/mask>
cable helper-ipv6-address
<dhcp
server ipv6 address>
configure interface cable-mac <
mac>
cable
helper-address
<DHCP Server IP address>
[
cable-modem | host | cpe | mta | ps | stb |
any ]
