8
●
Turn on the scale by pressing
key. Then, the display will show all the
segments and count up "0" to "9". You may stop this automatic counting by
pressing the
key.
●
When you turn on the display, make sure that platter is empty. Otherwise,
display will show "Err 1", an error of initial zero range. Please refer to "ERROR
MESSAGE" section for more information on page15.
●
When the weight becomes stable the display shows the stable sign (
) on.
●
You may need to make it "0.000" by pressing
key unless the display
indicate "0.000" under the empty platter.
1. Simple Weighing Mode
①
Place a commodity on the platter.
②
Remove the commodity from the platter.
2. Weighing with Tare
●
TARE means the weight of container being used for a commodity.
●
TARE key function is to subtract the weight of the container from full weight loaded
Place a container on
①
the platter.
