11
⑧
If you want to go back to the simple
weighing mode just press
key twice.
(Press the
key for a few second).
⑨
Suppose that the HIGH limit and LOW limit
are set up as 2.990kg and 1,990kg
respectively.
If the weight loaded is 2kg between HIGH and
LOW limit the display shows "OK" and the
scale continues to beep slowly.
If the weight loaded is above 2.990kg, HIGH
limit, the scale continues to beep rapidly.
6. Counting Function
●
Counting without Tare
①
Initial display as above.
②
Press
key twice to go to sample unit
selection mode. (Press the
key for a
few second)
③
Press
key to select the number of
sample unit. You can select 10, 20, 50, 100,
200, or 500 as a sample unit.
④
If you select "P_10" as a sample unit, then
please put 10 sample units on the scale.
Then press
key to set sample units.
⑤
Put all of commodities you wish to count,
and then check the number of pieces on
display.
