CAS RW-10Z, Руководство пользователя

Страница: 14 / 34

15
TEST – DISPLAY
Press the LEVEL2 key until diSPLy is displayed while TEST is displayed.
In order to enter the DISPLAY mode, press the LEVEL3 key to display all the LCDs and
have numbers indicated on the LED sequentially. You can exit the mode by pressing the
SET key.
Continue to press the LEVEL2 key if you wish to move to other Sub-Menu of the TEST
mode after you have exited, and press LEVEL1 key to move to the Main Menu. Press the
LEVEL1 key for more than 1 second to enter the Measurement mode.
TEST – BATTERY
Press the LEVEL2 key until BATTERY is displayed while TEST is displayed.
Once you press the LEVEL3 key to enter the BATTERY mode, current voltage of the
BATTER of the Indicator will be displayed. Upon pressing the LEVEL3 key after having
confirmed the voltage, you will exit the mode. (There may be slight difference between the
actual voltage of the battery and the value indicated.)
Current voltage will be displayed during recharging.
TEST – LOADCELL
Press the LEVEL2 key until LOADCEL is displayed while TEST is displayed.
LOADCEL will be displayed. Once you press the LEVEL3 key to enter the LOADCELL
mode, “PAD” will be displayed. When you press the desired PAD No., then the AD value of
the corresponding PAD will be indicated. You can exit by pressing the LEVEL3 key once
again.
TEST – TIME
Press the LEVEL2 key until TIME is displayed while TEST is displayed.
Once you press the LEVEL3 key to enter the TIME mode, the current time will be displayed.
You can exit by pressing the LEVEL3 key once again.
TEST – PRINT
Press the LEVEL2 key until PRINT is displayed while TEST is displayed.
PRINT will be displayed. Once you press the LEVEL3 key to enter the PRINT mode,
PRTOUT will be displayed and PRINT TEST will be outputted from the printer.
You can exit by pressing the LEVEL3 key once again.
TEST – Comm
Press the LEVEL2 key until TIME is displayed while Comm is displayed.
Comm will be displayed. Once you press the LEVEL3 key to enter the Comm mode, “PAD”
will be displayed. When you press the desired PAD No., it is possible to verify the
communication success rate with the corresponding PAD in the unit of %. You can exit by
pressing the LEVEL3 key once again.