CAS NC-1, Руководство пользователя

Страница: 8 / 27

9
3.LAMP of DISPLAY PART(Front body)
Power
ON Being connected the Adapter
Charge
RED In charge GREEN Charge is completed
LED
Remocon Receiving part from remote controller
BAT
Display the battery recharging time (rechargeable battery)-
about 6.7V remain
- Below zero
ZERO ON when current weight is 0
TARE ON when tare is activated
LCD
OZ/lb/kg Weight Unit
4. KEY
KEYS FUNCTIONS
Power is ON while pressing for 1 second
Power is OFF while pressing for 2.0 seconds
Above function is possible while the power switch on the rear part is ON
Please turn off the power switch on rear part when not use for a long time.
It makes the current weight within the zero range to zero
(±2% of maximum capacity)
Pressing ZERO key for 2 second, can enter the TEST Mode
It is used to weigh with a container
If press the tare key at unload state, Tare state is released
Pressing the ON/OFF key while tare key is pressed, can enter the SET Mode
It is used to weigh the moving things
If you press this key once more in the hold mode, hold state is released
(at AVERAGE HOLD, at MANUAL HOLD, at PEAK HOLD)
It is used to change the unit of weight(kg<->lgToggle _ U.S.A. version)
This key is not operated in the area which lb unit is used only
5. REAR PART
Power Switch
POWER
Main Power Switch (If use, you have to turn on this switch)
Charger Adaptor connector
Jack Cover
If you want to recharge the battery, Connect to the adaptor.