CAS LP-2, Руководство пользователя

Страница: 82 / 97

8 .X and Z Modes
76
8 .X and Z Modes
8.1 Reading Sales Summaries: X mode
X mode is used to read (i.e. print and display) sales data. When sales data is displayed, only the user
display will be on, that is, the customer side display will be off. There are a variety of reports that you
can generate from X mode. Each of these reports is kept in two separate counters or “books” called X1
and X2. The X1 and X2 reports allow you to print reports at any time for either of the reporting periods.
You can use X1 reports to see current daily totals and X2 reports to see current weekly totals. The time
period combination you chose is completely dependent upon how you use Z1 and Z2.
There are 7 detailed reports and 1 summary report called the X Report for each of the periods X1 and
X2. That’s 8 reports per period.
Remember, on a network, only the master scale will have the sale data
for ALL scale. Also, remember that you can generate as many X reports as you would like because X
mode does NOT clear any sales data.
To access X mode, you can select option 4 from the Main Menu. The scale will prompt you for a level 2
password. Enter the password and press the
PRINT key. You will be at the X1: Read Totals screen. You
can press PAGE UP and PAGE DOWN to change from X1 to X2 screens.
From here you can select the
report that you wish to generate.
8.1.1 PLU Sales
From the X1 or X2 Read Totals screen you can press
1 to select the PLU Sales report. The X1: PLU Sales
screen will be displayed.
From here you can select the
department number and PLU
number of the PLU you wish to
display the sales report of. You
can also press the SAVE key to
print the report.
Once you have selected a PLU and pressed
PRINT , the display will show the sales data for that PLU. At
that point you can select another department and/or PLU to see the sales data of. If you wish to print
the sales report, make sure that there are sufficient labels/paper in the printer; however, if you run out of
labels/paper during an X report, do not worry because you can re-generate that same X mode report
as many times as you would like.
< X1: READ TOTALS >
(1/2) Periodic Totals #1
1.PLU Sales 5.Scale Sales
2.Misc. Sales 6.Hourly Sales
3.Group Sales 7.Clerk Sales
4.Department Sales 8.X1 Report
Press SAVE to print report
< X1: PLU SALES >
Department: [ 1]: Bakery Department
PLU: [ 0]: PLU not found