6
The overhead puller is mounted on the tower that repairs the top area of accident vehicle .
2.1.2
CLAMPS/SUPPORT ASSEMBLY
The CLAMPS/SUPPORT DEVICE of MEG210C is consisted of four main clamps and two
wheel brackets. The clamp system is used to locate, clamp and support the vehicle. These
clamps can be adjusted up and down. The wheel bracket is used to support the accident
vehicle the way the wheel is.
Main clamp
2.1.3
HYGRAULIC SYSTEM
Two air hydraulic pumps are included.
2.1.5 ACCESSORY ASSEMBLY
1. Pulling tools assembly.
It consists of a tools board and dolly, 14 pieces of pulling tools. The different pulling
tools are used according to different distortions. The pulling tools may be used by
themselves or in conjunction with other tools. The use method is not rigid but adaptable
according to the model of vehicle, the degree of damage, and personal preference. It may
develop the preference of operators and supply more convenience. These 17 pieces of
pulling tools are part of a 20 tool set.