4
1.2 TRADEMARK
When receiving the frame machine,please check the parts of the identification nameplate
that has to correspond to following. Table 1:
Specification
1.3 SYMBOLS
SYMBOL
MEANING
COMMENT
Caution,
injure foot
When moving the tower, operators
should following the regulations in
order to avoid injuring foot.
WARNING
Operators are forbidden to stand
behind the tower which is working,
in case the chain or accessory crash
backwards and hurt people. Chains
should not be distorted or knotted.
Max Loading of
overhead puller
The Max loading of every bore is
identified on the overhead puller.
All operations marked by this
symbol are strictly to be followed
with maximum attention.
MODEL:
LCH-TCR302
FRAME LENGTH
5600mm
FRAME WIDTH
2200mm
FRAME HEIGHT
580mm
HYDRAULIC PRESSURE
70Mpa(1000psi)
POST MAX. TENSION
95KN
POST WORHING RANGE
360 Degree
PNEUMATIC PRESSURE RANGE
0.8MPa