5
Chapter 2 FRAME MACHINE DESCRIPTION
2.1 GENERAL PRESENTATION OF STANDARD COMPONENTS
The frame machine H-100 standard type is composed as follows:
Table 2:
NO
1
MAIN PART
FRAME ASSEMBLY
PART
Frame
QUAN.
1
UNIT
Set
Pulling tower
2
Set
Main chain
2
Piece
Chain with hook
2
Piece
Loading ramp
2
Piece
Overhead boom
1
Set
2
CLAMPS/SUPPORT
Main clamps
4
Set
ASSEMBLY
Air hydraulic pump
2
Set
Air hydraulic cylinder
3
Set
3
ACCESSORY
Pulling tools
14
Piece
ASSEMBLY
Tools board
1
Set
Secondary Air Jack
1
Set
4
Measure System
2-dimension measure system
1
Set
2.1.1
FRAME ASSEMBLY
The frame assembly is the place where the maintenance and repair process is carried out. It
is divided into the following subgroups:
A.
Frame.
The maximum applicable lifting weight of the frame with a basement is 3000 Kg.
ATTENTION: it is not permit to overload the maximum lifting weight on the frame
indicated in the Table 1.
B.
Pulling tower.
The pulling tower can mobile 360 degrees around the frame.
C.
Loading ramps.
The loading ramps are mounted on the frame that help the vehicles load on the frame.
D.
Overhead puller.